Sending a Fax using the Advancement MFP

Post date: Apr 01, 2010 1:6:25 PM

• 1. Press the Facsimile button on the left of the control panel

  2. Place page(s) face up on the ADF (auto-document feeder) – the blue plastic tray on top of the copier

  3. Using the numeric keys on the control panel, enter the destination fax number. Remember to enter a 9 first!

  4. Press the Start button (the same as you use when making a copy). The pages will be scanned into memory, then the number will be dialed.

  5. After a successful fax transmission, you will receive a print-out confirmation with a reduced-size image of the first page of your transmission. Look for an OK under the word Result near the top of that page.

NOTE: If your fax is initially not sent successfully (due to busy signal, phone pick-up, etc), it will be stored and retried up to 5 times every 3 minutes. If, after those retries, there was a problem with the transmission, a status report will be printed with details regarding why your fax failed.